Gas Welding - The Welders Warehouse- Welding

Cutting Attachment

Cutting Attachment fits onto your existing Light or Heavy Duty Torch Shank to allow gas cutting of Steel from around 1mm to around 25mm (1mm to 15mm for Light Duty) depending on the size of nozzle selected. Can be used with Oxygen/Acetylene or Oxygen/Propane, depending on the nozzle selected (see Nozzle options on the main "Gas Gear" Page.

To determine which type of Torch Shank you have, check the size of the nuts on your Hoses, if the nuts are the same size at both ends of the hoses, you are most likely to have a Heavy Duty Shank, if the nut at the Torch end of the Hoses is smaller, you are most likley to have a Light Duty Torch Shank.

Click Gas Gear to go back a level

£31.96 (£27.20 excluding VAT)

Select Type

Light Duty
Heavy Duty

----------------------------------------------------------------------------------------------------