Plasma Cutter SWP Cut 40

Blue Brand Cut 40

Excellent value Plasma Cutter. Clean Cuts 8mm Steel and severs up to around 12mm Steel. Plasma Cutter also features a Pilot Arc for easy starting and cutting over perforated materials.

Ideal for the Home, or Light Industrial Workshop.

> 230v Input
> Max Output 40amps
> Pilot Arc
> Max Sever 12mm Steel
> Torch Length 6M
> Requires around 100 LPM of Air at 5bar Pressure
> 12 Month Return to Base Warranty

Practical Classics Product Test "BEST BUY"

Practical Classics Test Engineer said of the Cut 40
"A really stable arc and power to spare meant that the Cut 40 zipped through our test panel cleanly with its simple dial control only half-way round. Just under 6 Metres of torch lead makes this unit super flexible - and at 8Kg, it's no bother to move about the workshop......"

When featured in PRACTICAL CLASSICS magazine as part of a restoration project, journalist Ben Field commented:

"This is the modern marvel I mentiond in the introduction......... It made the job of cutting through the floor pans so easy it was ridiculous.........The fact that the panel was caked with underseal and general cack on both sides makes the feat all the more amazing..........Surely, the Plasma Cutter is the tool of the gentleman restorer, and all the better for it".

Click Plasma Cutter to go back a level

£479.00 (£407.66 excluding VAT)

Torch Spares Kit £35.00

Cutting Guide Kit £49.00

----------------------------------------------------------------------------------------------------